Some Composed Parts about Vertical Preheater

Hongxing company adopts LDO vertical preheater, and compared with ordinary perheater, it reduces the loss of line gas resistance and the power of smoke ventilator greatly, it saves the energy consumption. Besides, it features easy operation, little maintenance, simple masonry and reliable performance.

Vertical preheater system primarily including six parts:

1. The above feeding system:Mainly including the above hopper and feeding pipes, feeding method and structure can guarantee the safe sealed when feeding materials into the body of preheater, so that the cold air from outside can not enter into the preheater ,and it can also make use of Stick valve to achieve continuous feeding.

2. Preheated body: It is an important part to ensure that the materials can be preheated to more than 750℃,and it is made up of the preheated room, hoisting devices, refractory lining and other parts. Most of the structure in this part is metal component, and some of them ,we choose the heat-resistant steel according to the need of the material, as the heat-resistant steel can work under 1100-1000℃. Besides, with nice design and good sealing, the refractory lining can ensure that the materials can be evenly preheated and reach the preheat temperature in the body.

3. Push feeder: mainly including push head, framework, connecting rods and other parts. And the push head applies the cast and welded heat-resistant steel, it can bear high temperature. Besides, each hydraulic push can follow the automatic control program to achieve sequential pushing. with the help of electric and hydraulic system.

4. Hydraulic system: Mainly includes the oil tank, the oil pump, motor, the solenoid valve, the hydraulic oil pipe, etc. And its main role is to control the Push feeder to complete pushing.

5. Lower part feeding room: Mainly includes the elephant trunk, the loading main feed compartment, and the feeding mouth, its main function is to import the materials into rotary kiln after preheating.

6. Framework: It mainly includes the column, ring beam and other parts; and the main role is to bear the above part structure of preheater.

7. The above feeding system:Mainly including the above hopper and discharging pipes, and bar valve, etc. Its structure can guarantee continuously conveying and good sealed performance when feeding materials into the body of preheater, thus the cold air from outside can not enter into the preheater, and it can also make use of Stick valve to achieve continuous feeding.

8. Preheated body: It is an important part to ensure that the materials can be preheated to more than 900℃,and it is made up of the preheated room, hoisting devices, refractory lining and other parts. Most of the structure in this part is metal component, and some of them ,we choose the heat-resistant steel according to the need of the material, as the heat-resistant steel can work under 1000-1200℃. Besides, with nice design and good sealing, the refractory lining can ensure that the materials can be evenly preheated and reach the preheat temperature in the body.

Leave a Reply

You must be logged in to post a comment.